KEY FEATURES

Material/Air Separation

• Separates conveyed material from air streams in pneumatic conveying systems.

No Paint to Flake, No Rust for Life

• Full SS304 stainless steel construction throughout.

Reduced Wall Wear

• Spiral "snail shell" inlet guides material along the wall without direct impact.

Simple Integration

• Round inlets and outlets for versatile ducting configurations.

Australian Engineering

• NER-registered design sign-off for WHS compliance.

HOW IT WORKS

Material and air enter through the side inlet under blower pressure. Centrifugal force drives material to the outer wall where it slides downward and exits through the bottom outlet. Air reverses direction at the cone apex and exits through the top outlet.

MODEL RANGE

TSE.CY52 (Cyclone - Short)

Height: 852mm | Width Diameter: 582mm | Inlet Ø: 160mm | Outlet Ø: 160mm | Weight: 18.49kg | Dust Hood: NO

Ideal for small-scale operations with ≤2.2kW blowers.

TSE.CY60 (Cyclone - Medium)

Height: 1,290mm | Width Diameter: 600mm | Inlet Ø: 160mm | Outlet Ø: 300mm | Weight: 43.85kg | Dust Hood: NO

Suited for medium-volume applications with 4-7.5kW blowers.

TSE.CY60T (Cyclone - Tall)

Height: 1,820mm | Width Diameter: 600mm | Inlet Ø: 160mm | Outlet Ø: 300mm | Weight: 53.85kg | Dust Hood: NO

Designed for higher-volume applications with 7.5-11kW blowers. Features left-hand inlet configuration for flexible ducting layout.

TSE.CY80 (Cyclone - Tall)

Height: 2,364mm | Width Diameter: 800mm | Inlet Ø: 200mm | Outlet Ø: 300mm | Dust Hood: YES

Built for large-volume central collection systems with 11-15kW blowers. Includes dust hood as standard.

Note: CY60 and CY60T share the same diameter but differ in height and weight. CY80 includes dust hood as standard.

APPLICATIONS

Plastics Processing

• Efficient separation for PET, HDPE, and PP regrind streams

Grain Handling

• Gentle handling preserves kernel integrity during transfer

Bagging Systems

• Integration point between blower and collection systems

Recycling Facilities

• Critical component in material separation lines

INTEGRATION OPTIONS

Cyclone with Mounting Brackets

• Standard side mounting brackets for frame or bagging station attachment

Dust Hood + Sock

• Attaches to top outlet for fine dust collection (standard on CY80)

Pre-Cleaner

• Removes fines and labels before cyclone inlet

Rotary Valve

• Controlled material discharge from bottom outlet

Bagging Station Frame

• Complete mounting frame with slide gate and bag clamps

WHY CHOOSE TELFORD SMITH CYCLONES?

• SS304 construction is easy to clean and maintain between material changes
• Side mounting brackets enable simple attachment to frames or bagging stations
• Round inlets and outlets allow versatile connection configurations
• Spiral inlet design reduces height while maintaining separation efficiency
• No moving parts - separation occurs purely through centrifugal force

READY TO INTEGRATE?

Need a cyclone for your material handling system? Telford Smith offers:

• Standard cyclones from stock
• Custom configurations to match your specific requirements
• Engineering support for proper system integration

Contact our team today for a consultation and system design review.